中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

100G CFP2 LR4 single Rate 10km Module

Features

Supports single-rate 103.1Gb/s aggregate(100GE);
Lane bit rate 25.78 Gb/s 100GbE;
Up to 10km transmission on SMF;
LAN WDM laser and PIN receiver;
High speed I/O electrical interface (CAUI-4);
MDIO interface with integrated Digital Diagnostic monitoring;
CFP2 MSA package with duplex LC connector;
Single +3.3V power supply;
Maximum power consumption 6W;
Operating case temperature: -5 to +70 °C;
Complies with IEEE802.3bm;
Complies with EU Directive 2015/863/EU;

Application

100GBASE-LR4;

现在查询下载

类别

热门产品

产品详细信息

CFP2-100G-LR4

100G CFP2 LR4 single rate 10km Module

Order Information

Part No.	Data Rate	Laser	Fiber Type	Distance	Optical Interface	Temp	DDMI
CFP2-100G-LR4	103.1~111.8Gbps	LWDM	SMF	10km	LC	-5~70C	Y

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Storage Temperature	TS	-40	-	+85	°C
Supply Voltage	VCC	-0.5	-	+4.0	V
Operating Relative Humidity	RH	-	-	+85	%

Recommended Operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Operating Case Temperature	TC	-5	-	+70	°C
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Power Supply Current	ICC			1.8
Maximum Power Dissipation	PD	-	-	6	W
Aggregate Bit Rate	BRAVE	-	103.125	-	Gb/s
Lane Bit Rate	BRLANE	-	25.78	-	Gb/s
Transmission Distance	TD		-	10	km	Over SMF

Optical Characteristics

Transmitter
Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Center Wavelength Lane 0	λ0	1294.53	1295.56	1296.59	nm
Center Wavelength Lane 1	λ1	1299.02	1300.05	1301.09	nm
Center Wavelength Lane 2	λ2	1303.54	1304.58	1305.63	nm
Center Wavelength Lane 3	λ3	1308.09	1309.14	1310.19	nm
Total Launch Power, 100GE	PALL	-	-	10.5	dBm	1
Average Launch Power per Lane, 100GE	PTX_LANE	-4.3	-	4.5	dBm	1
OMA per Lane, 100GE	OMA	-1.3	-	4.5	dBm	1
OMA–TDP per Lane, 100GE	OMA_TDP	-2.3	-	-	dBm
Difference in launch power between lanes	PTX_DELTA_LANE	-	-	3.6	dB
Average Output Power (Laser Turn off)	P0UT-OFF	-	-	-30	dBm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Extinction Ratio, 100GE	ER	4	-	-	dB
Transmitter and Dispersion Penalty	TDP	-	-	2.2	dB	2
Optical Return Loss Tolerance	ORLT	-	-	20	dB
Optical Eye Mask, 100GE	Compliant with IEEE 802.3bm					2
Receiver
Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Center Wavelength Lane 0	λ0	1294.53	1295.56	1296.59	nm
Center Wavelength Lane 1	λ1	1299.02	1300.05	1301.09	nm
Center Wavelength Lane 2	λ2	1303.54	1304.58	1305.63	nm
Center Wavelength Lane 3	λ3	1308.09	1309.14	1310.19	nm
Average Rx Power per Lane, 100GE	PRX _LANE	-10.6		4.5	dBm	3
OMA Sensitivity per Lane, 100GE	POMA_LANE	-	-	-8.6	dBm	3
Receiver Overload	PIN-OL	4.5	-	-	dBm
Reflectance	Ref	-	-	-26	dB
LOS Assert per lane	LOSA	-20	-	-	dBm
LOS De-assert	LOSD	-	-	-12	dBm
LOS Hysteresis	LOSH	0.5		4	dB

Notes:

1. The optical power is launched into SMF.

2. Measured with a PRBS 231-1 test pattern @25.78125/27.952 Gb/s, Hit ratio≤5E-5.

3. Measured with a PRBS 231-1 test pattern @25.78125 Gb/s, BER≤1E-12.

Electrical Characteristics

High-Speed Signal: Compliant to CAUI-4 (IEEE 802.3bm)

Low-Speed Signal: Compliant to CFP2 MSA Hardware Specification

Transmitter (Module Input)
Parameter		Symbol	Min.	Typical	Max.	Unit	Notes
Differential Data Input Amplitude		VIN,P-P	85	-	900	mVpp
Differential Termination Mismatch			-	-	10	%
Tx_Disable	Normal Operation	VIL	-0.3	-	0.8	V
Tx_Disable	Laser Disable	VIH	2.0	-	VCC+0.3	V
Receiver (Module Output)
Parameter		Symbol	Min.	Typical	Max.	Unit	Notes
Differential Data Output Amplitude		VOUT,P-P	200	-	900	mVpp
Differential Termination Mismatch（1MHZ）			-	-	10	%
Output Rise/Fall Time, 20%~80%		TR	12	-	-	ps
Rx_LOS	Normal Operation	VOL	-	-	0.2	V
Rx_LOS	Lose Signal	VOH	VCC-0.2	-	-	V

Digital Diagnostics

Parameter	Range	Accuracy	Unit	Calibration
Temperature	0 to 70	±3	ºC	Internal
Voltage	0 to VCC	0.1	V	Internal
Tx Bias Current Per Lane	0 to 100	10%	mA	Internal
Tx Output Power Per Lane	-4.3 to 4.5	±3	dBm	Internal
Rx Power (Each Lane)	-10.6to 4.5	±3	dBm	Internal

Mechanical Dimension

相关产品

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. Features Compliant with IEEE Std 802.3bm Compliant with SFF-8665 Transmission data rate up to 25 .78125GbpsData rate per channel High Reliability 850nm VCSEL technology Electrically hot-pluggable Single +3 .3V power supply Case temperature range: 0 ~ +70℃ Maximum power consumption 2 .5W Single MPO12 connector RoHS complaint

100G QSFP28 CWDM4 2km LC Optical Transceiver

100G QSFP28 CWDM4 optical transceiver module, support 100Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.

100G QSFP28 LR4 1310nm 10km LC Optical Transceiver

100G QSFP28 LR4 optical transceiver module, support 100Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Support 100GBASE-ER4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81Gbps Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb QSFP28 ER4 40Km 1310nm LC Optical Transceiver

100G QSFP28 ER4 optical transceiver module, support 100Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features: 4 lanes MUX/DEMUX design Support 100GBASE-ER4 for line rate of 103.125Gbps. Integrated LAN WDM TOSA / ROSA for up to 40 km reach over SMF. Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

100G QSFP28 ZR4 optical transceiver module, support 100Gb/s and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Support 100GBASE-ZR4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81GbpsLANWDM EML laser and PIN receiver with SOA Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb/s QSFP28 DWDM Dual CS Adaptor Transceiver

100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.

100GBASE-SR Bi-Directional QSFP28 850/900nm 100m DOM LC MMF Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity.

100GBASE-LR Bi-Directional QSFP28 1280/1310nm 20km LC SM Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a Simplex LC connector interface for long-reach data communication and interconnect applications using one core Single-Mode Fiber (SMF).

联系我们